Wood screw SILVERMATE ZnB - Partial thread ( TG ) - POZI

Description:

The Silvermate is a new, very strong screw for screwing into solid wood, but at the same time it is suitable for screwing into chipboard with a specially developed tip and other accessories. Characteristic elements thanks to which we dare to say that this screw is the best thing ever. As the only screw on the market, the next generation SilverMate screw has its own optimum spacing and special features for each length and diameter, used lightly or heavily. On the other hand, short screws have a smaller pitch in order to achieve a high pull-out value. Longer screws, from 60 mm to 200 mm, have an increasingly larger pitch so that these screws can be driven faster. Today's screw tops are getting stronger and faster screwdriving saves a lot of time.

Pri naslednji generaciji vijakov SilverMate je poudarek na 4 lastnostih, ki so vsaj enakovredne najbolj znanim blagovnim znamkam A:

With low initial pressure, the next-generation SilverMate screw goes into the wood from the very first turn. Especially with screws with a type 17 cutting tip, much more pressure is often required.
Next generation SilverMate screws are clearly less likely to break under high screw loads. The 4.0, 4.5 and 5.0 diameters are reinforced.
Next generation SilverMate screws are noticeably lighter than almost any other brand on the market. Screw resistance is reduced by 25-30%, especially in the longer 5.0 and 6.0 diameter sizes.
With the next generation SilverMate screws, there is little risk of splitting when the screw is used close to the head of the board or batten, due to the special thread milling at the tip.

DOP_SILVERMATE_certifikat_2_3.pdf